Remote Two Wire Gas
 Transmitters Series
32 Years of Proven Experience and Performance

 P2700


Conspec's Remote Two (2) Wire Gas Transmitters include a 4-20 mA two (2) wire sensor inside a NEMA 4x wall mount enclosure. The sensors are designed to be used with any building or control system, which accepts a 4-20 mA sensor input. The Series P2700 Remote Transmitters may also be combined with Conspec's P2065 Single Channel Controller or P2259 / 2260 Multi-Channel Controllers to provide complete alarming and control of environmental ventilation. The sensor / transmitters are designed for standard two-wire operation where the output is supplied via the same wire pair as the power supply. The power supply must be between 10 and 35 VDC. Use of AC voltage will cause the unit to fail. The external circuit loop is connected to the sensor / transmitter PCB via a screw terminal connector.
 FEATURES
Rugged NEMA 4-4X Weatherproof Non-Metallic Enclosure Easy One Person Calibration
Automatic Restart After a Power Interruption Long Sensor Life, Quick and Easy Replacement
1-Year Warranty Custom Design Available on ALL Conspec Products
 TOXIC GASES AVAILABLE:
P2710 Carbon Monoxide (CO) 0-50, 100, 200, 500, 1,000 PPM P2714 Sulphur Dioxide (SO2) 0-10, 100, 1,000, 2,000 PPM
P2720 Oxygen (O2) 0-25% P2715 Chlorine (CL2) 0-10 PPM
P2712 Nitrogen Dioxide (NO2) 0-20 PPM P2716 Hydrogen (H2) 0-4%, 0-2,000 PPM
P2711 Nitric Oxide (NO) 0-50, 100 PPM P2717 Hydrogen Chloride (HCL) 0-25, 100, 150 PPM
P2713 Hydrogen Sulphide (H2S) 0-25, 50, 100, 200 PPM P2718 Ammonia (NH3) 0-50 PPM
P1879-X Calibration Kits Are Available For The Sensors P2719 Ozone (03) 0-2 PPM
 SPECIFICATIONS
Enclosure Type: UL Listed NEMA 4-4X Non-Metallic Calibration: Via Built-In Span and Zero Potentiometer
Power Input: 10 -35 VDC Output Impedance: 4M Ohms
Operating Temperature: -20 to +45 °C Operating Humidity: 0-99% Non-Condensing
Best viewed with 800 x 600 screen resolution.

 Copyright 2000 - Conspec Controls Ltd.