Conspec Controls Ltd.

The External Speaker/Microphone P213439 is used to remotely operate the Hand-Held Radio.

The 4" Vehicular Speaker P900123 (not shown) is designed to be in the cabs of jeeps and pick-ups used as underground mine vehicles. Use with Vehicle Radio and In-Dash Radios.

The Harsh Environment Microphone P900642 is designed to withstand the harshest underground mine environment. It is equipped with a replaceable microphone cartridge. Used with Vehicle Radios and Section Radios.

Conspec's Headsets P212377 are equipped with an attached microphone and are environmentally tough. They are designed to be worn under a hard-hat. The push-to-talk button can be located on one of the earphones or on a belt clip. Used with Hand-Held Radio and Vehicle Radios.

The Holster P413533 (not shown) is designed to house the Hand-Held Radio and can be attached to the mine belt or onto the strap of the Shoulder Antenna.

The Shure Microphone P900205 provides quality audio. It is designed for use in areas that are not exposed to harsh environmental conditions. Available with 5 pin or 6 pin connector. Used with Audio Heads and Remote Radios.

VOICE ACTIVATED TRANSMIT SWITCH (VOX)

Conspec's P213464 Voice Activated Transmit Switch (VOX) is a Hands-Free Communicating device to operate various radios and headsets when the operator speaks without the loss of the first syllable of voice.

This hand-free activation of our radios includes automatic background noise adjustment to allow the operator to communicate near noisy equipment.

Sealed in a sturdy, aluminium case with a belt clip, this unit is connected between our Headset and our Hand-Held Radio for clear transmission of audio signals to other radios in the area or through our Repeater Network. Unit has internal 400 mAH NiCad battery so as not to drain the Hand-Held.

Battery Voltage: 7.2 VDC
DC Supply Range: 7 - 16 VDC
DC Current Requirement: 20 mA Stand-By & 30 mA VOX Mode
Battery Indicator: Low & Flat Warning Tones
Dimensions: 97mm X 65mm X 27mm
Auto Delay: 5 - 500 mS